Installation, Operating, Maintenanceand After Sales Manual.Product Serial Number: Please leave this manual with the end user.Part Number: 1370064Issue
ManualManual mode can be used for air circulation without heat or formanual control of the heating function.Use ‘+’ to scroll beyond 35°COr use ‘-’ to
11SLIM-LINE RC12.0 Troubleshooting (continued...)Common Installation FaultsFor optimum performance, this unit must be correctly sized tomatch the hea
heatingthroughinnovation.After Sales Service:MYSON Service, Somerden Road, Hull, East Yorkshire HU9 5PET: 01482 713927, F: 01482 789056, service.conve
1.0 General Information 032.0 Heating System Design 033.0 Unit Selection/Sizing 034.0 Location 035.0 Preparation 046.0 Fixing 047.0 Water Connections
03SLIM-LINE RC1.0 General Information2.0 Heating System Designl This MYSON SLIM-LINE RC fan convector is designed for wallmounted installation with
04SLIM-LINE RC5.0 PreparationBefore proceeding with the installation, unpack the carton contents and check against the checklist below: 1. SLIM-LINE
05SLIM-LINE RC7.0 Water Connectionsl Connect unit to system flow and return pipes using the two 15mm isolating valves (see fig. 2). Note: To ensure e
06SLIM-LINE RCl This unit is supplied with factory fitted test leads. Remove these and discard.l A fused electrical spur with a maximum 3A fuse and a
07SLIM-LINE RC9.0 Commissioning Procedurel Fill and vent the system. l Open both valves fully and vent air from the heat exchanger by unscrewing the
Tested in accordance with BS 4856 Part 1. Flow rate 340 ltr/h (75 gal/h).Flow Rate Correction Factors:455 ltr/h (100 gal/h) multiply by 1.03 227 ltr/
09SLIM-LINE RC11.0 Operating InstructionsDescriptionThis SLIM-LINE RC unit is fitted with a control system thatprovides 3 different operating modes.
Comments to this Manuals